Fabrication for Offshore and Subsea

The Brook Welding Company has decades of experience in producing offshore and subsea steel fabrications and structures to the highest standards for the oil and gas exploration industry. We understand that a lot of these fabrications end up in the harsh conditions of the north sea and therefore need to be built to the relevant regulations and are subjected to rigorous tractability programme. We are very experienced in meeting and exceeding these demanding criteria, right down to the exacting paint finish. We have the capacity to handle fabrications up to 60 Tonnes and have the room to test build if required.

As well as offshore and marine work we are well practiced in the demanding and often life critical nature of subsea fabrication work. We have worked on projects ranging from diving bell systems and associated winch gear to cable laying equipment so you know your build is in safe hands.

Oil and Gas Fabrication

Carbon Steel Fabrication for Offshore

Our ability to keep the build in house from when the certified plate or section is delivered, right up until it leaves as a painted & machined fabrication gives the ability to guarantee quality and finish. To see the specifications of our Thermal stress relieving, shot blasting & painting shop please click the link.

We are ISO 9001 certified as well as having a large range of welding procedures for BS EN 288, BS EN ISO 15614-1 & ASME IX and welder approval for BS EN 287-1, BS EN ISO 9606-1 & ASME IX. We are experienced in working with Det Norske Veritas (DNV), Bureau Veritas (BV) and Lloyds and regularly conduct DPT, MPI and Ultrasonic testing.

Contact our friendly staff to find out what we can do for you. Our skilled quoting team are experts in turning around competitive quotes in a short time frame.


Equipment

CNC Profiling Machine

  • New 2015 ESAB CNC Combirex DX3500
    • Cutting size: 3 x 12 metres
    • Plate thickness: 6 - 200 mm
  • Testing of Heat Affected Zones (HAZ) (BS EN 1090-2:2008)
    • All results below 350 HV
    • Tested in accordance with ISO 6507-1:2005
    • UKAS accredited test house.

Welding Machines

  • 8 MIG/MAG units, 600 amps
  • 2 MMA units 500 amps
  • 1 TIG unit 350 amps
  • Calibrated in accordance with BS EN 50504:2008
  • Incorporating ISO 17662:2005
  • UKAS calibrated testing equipment

Stress Relieving Furnace, Shot blasting & Painting

Quality

B.S. EN ISO 9001:2008

B.S. EN 1090-1:2009+A1:2011 Ex Class 3

Welding Procedures:

  • BS EN 288 / BS EN ISO 15614-1:2004 / ASME IX.

Welder Approval:

  • BS EN 287-1:2011 / BS EN ISO 9606-1:2013 / ASME IX.

Inspection

  • Visual to ISO 5817:2014 using ISO 17637:2003 Equipment.
  • DPT, MPI, Radiograph and Ultrasonic testing available.
ISO 9001 and CE 1090

Heavy Fabrication Shop

Work Area:
750 square metres (8000 sq. ft.)
Lifting capacity:
Maximum lift 60 tonnes
Maximum job height 6 metres
Door Access:
4.2M wide X 6.0M high

Machine Shop

Work Area:
560 square metres (6000 sq. ft.)
Maximum lift 20 tonnes
Maximum job height 5 metres

Preparation and Finishing Shop

Work Area:
850 square metres (9000 sq. ft.)
Maximum lift 20 tonnes
Maximum job height 6 metres